1. Medium: Oxygen
2. Inlet pressure: 1.5bar
3. Temp. Input: ≤ 40 ℃
4. Discharge pressure: 200bar
5. Temp. discharge: ≤ 50 ℃
6. Volume: 100 Nm3 / h
7. Piston stroke: 110mm
8. Compression level: 4stages
9. Structure type: Vertical 100% oil-free
10. Number of cylinders: 4 cylinders
11. RPM: 320r / min
12. Voltage: 220v / 60hz / 3ph
13. Cooling: water
14. Cooling volume: 5T-hour
15. Spindle power: ≤36.5kw
16. Engine rpm: 970r / min
17. Oxygen inlet / outlet: 50, M22 mm
18. 40mm water inlet and outlet
19. Dimensions: 2100X1100X1600mm 20. Weight: 1.6T
21. Coupling: Belt
22. Material of cylinder, valve, piping, cooler: stainless steel
Our oxygen compressor has the following characteristics
According to different working conditions of customers:
1. Completely 100% oil-free, no oil required, stainless steel cylinder
2. Suitable for VPSA PSA oxygen source pressurization
3. No pollution, keep the gas purity unchanged
4. The quality is safe and reliable, with good stability, comparable to and replacing similar foreign brands.
5. Low purchase cost, low maintenance cost and simple operation.
6. The service life of the piston ring under low pressure conditions is 4000 hours, and the service life of piston rings under high pressure conditions is 1500-200 hours
7. Brand motor, you can specify the brand, such as Siemens or ABB brand
8. Supply the Japanese market to meet Japan's demanding quality requirements
9. According to the customer's specific working conditions, the compressor is designed for single-stage compression, two-stage compression, three-stage compression and four-stage compression.
10. Low speed, long life, average speed 260-400RPM,
11. Low noise, the average noise is less than 75dB, can work quietly in the medical field
12. Continuous continuous heavy-duty operation, stable operation for 24 hours without shutdown (depending on the specific model)
Technical Parameters
| Model | Medium | Intake pressure .barg | Exhaust pressure .barg | Nominal volume flow NM3/h | Motor power .KW | Voltage frequency | Intake/exhaust
Breath(mm) | cooling method | Weight (kg) | Dimensions(mm) | Compression stages |
| GOW-4/4-150 | Oxygen | 3-4 | 150 | 4 | 3 | 380/50/3 | DN15/DN6 | Air cooling | 320 | 1000×750×1050 | 4 |
| GOW-5/4-150 | Oxygen | 3-4 | 150 | 5 | 3 | 380/50/3 | DN15/DN6 | Air cooling | 320 | 1000×750×1050 | 4 |
| GOW-6/4-150 | Oxygen | 3-4 | 150 | 6 | 3 | 380/50/3 | DN15/DN6 | Air cooling | 320 | 1000×750×1050 | 4 |
| GOW-8/4-150 | Oxygen | 3-4 | 150 | 8 | 4 | 380/50/3 | DN15/DN6 | Air cooling | 330 | 1000×750×1050 | 4 |
| GOW-10/4-150 | Oxygen | 3-4 | 150 | 10 | 5.5 | 380/50/3 | DN15/DN6 | Air cooling | 340 | 1000×750×1050 | 4 |
| GOW-12/4-150 | Oxygen | 3-4 | 150 | 12 | 5.5 | 380/50/3 | DN15/DN6 | Air cooling | 340 | 1000×750×1050 | 4 |
The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high pressure gas.
Note:
1, In addition on the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement.
2, Clients' inquiries should contain related parameters
A. The gas compression medium
B. The flow rate: _____Nm3/hr
C. Inlet pressure: _____ Bar
D. Discharge pressure: _____ Bar
E. Inlet temperature
F. Cooling water temperature as well as other technical requirement.
